ANZSCO 1.3 occupation

Fitter (General): ANZSCO code 323211

Fitter (General) is occupation 323211 in ANZSCO 1.3, the classification Immigration New Zealand uses for most work visas and every Skilled Migrant Category application. It sits at ANZSCO skill level 3, in unit group 3232 Metal Fitters and Machinists.

ANZSCO code: 323211
Skill level: 3
Unit group: 3232 Metal Fitters and Machinists
Green List: Yes, Tier 2 (named roles)

Fitter (General): qualifications and experience required in New Zealand

ANZSCO places this occupation at skill level 3. For New Zealand, ANZSCO describes the qualifications and experience as:

NZQF Level 4 qualification. At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Under the National Occupation List, code 323211 is "Fitter (General)" at NOL skill level 3: NZQCF Level 4 qualification, or at least three years of relevant experience may substitute for the formal qualification (NZQCF Level 4/NOL Skill Level 3).

A skill level describes the occupation, not you. Immigration New Zealand matches a job to the single closest occupation, and the skill level comes from that occupation; more experience does not move an occupation to a higher level.

What does a fitter (general) do?

Fits and assembles metal parts and subassemblies to fabricate production machines and other equipment.

Tasks for unit group 3232 Metal Fitters and Machinists include:

Studying drawings and specifications to determine suitable material, method and sequence of operations, and machine settings
Fitting fabricated metal parts into products and assembling metal parts and subassemblies to produce machines and equipment
Checking fabricated and assembled metal parts for accuracy, clearance and fit using precision measuring instruments
Setting guides, stops and other controls on machining tools, setting up prescribed cutting and shaping tools and dies in machines and presses, and setting controls for textile machines
Forming metal stock and castings to fine tolerances using machining tools to press, cut, grind, plane, bore and drill metal
Cutting, threading, bending and installing hydraulic and pneumatic pipes and lines
Preparing pattern mechanisms to control the operation of textile machines used to spin, weave, knit, sew and tuft fabric
Diagnosing faults and performing operational maintenance of machines, and overhauling and repairing mechanical parts and fluid power equipment
May erect machines and equipment on-site

Other job titles under ANZSCO 323211

Alternative titles and specialisations from ANZSCO, and job titles Stats NZ lists under the same code:

Computer Numeric Control Setter
Diesel Fitter-Mechanic
Fitter-Machinist
Fitter-Mechanic
Maintenance Fitter
Mechanic (Diesel and Heavy Earthmoving Equipment)
Plant Mechanic
Agricultural Machinery Mechanic
CNC Setter
Construction Machinery Mechanic
Earthmoving Machinery Mechanic
Factory Workshop Engineering Fitter
Lathe Operator
Light Engineering Instructor
Locomotive Maintainer
Machine Setter
Machinery Mechanic
Maintenance Instructor
Maintenance Mechanic
Maintenance Plant Serviceman
Mechanical Fitter
Plant Maintenance Mechanic
Pump Mechanic
Service Engineering Fitter

Show 11 more

Water Works Fitter
Coffee Machine Technician
Diesel Fitter Mechanic
Fitter Machinist
Fitter Mechanic
Fitter and Maintenance Engineer
General Mechanical Engineering Trades Workers
Machine Mechanic
Mechanical Fitter Apprentice
Milking Machine Technician
Service Engineering Fitter Apprentice

What skill level 3 means for New Zealand visas

Visa rule	For this occupation	More
Accredited Employer Work Visa: longest visa	Up to 5 years for skill level 1 to 3 roles.	AEWV guide
AEWV: evidence of English	Required for skill level 3 roles from 1 June 2026, with limited exemptions.	AEWV guide
Supporting a partner's visa	The skill level 1 to 3 wage threshold applies.	Partner of a Worker
Skilled Migrant Category: Skilled Work Experience pathway	Open to skill level 1 to 3 occupations, with work experience and pay requirements.	Skilled Work Experience pathway
SMC red and amber lists	Not on either list.	INZ's lists
SMC Trades and Technician pathway	Listed by INZ as an eligible occupation.	Trades and Technician guide
Green List	Fitter (General): Tier 2 (Work to Residence after 24 months). Only the named role qualifies, with INZ's qualification, registration or experience requirements for it.	Green List guide

Rules as published by Immigration New Zealand. Lists synced 31 October 2026. Each visa has further requirements beyond skill level, including pay and work experience.

National Occupation List occupations for ANZSCO 323211

Stats NZ's National Occupation List is gradually replacing ANZSCO. These NOL occupations map to ANZSCO 323211. Immigration New Zealand accepts a NOL code only for an AEWV or job check, and only for occupations on its published list; for any other visa, use the ANZSCO code.

NOL code	NOL occupation	NOL skill level	INZ accepts for an AEWV
323211	Fitter (General)	3	Not yet

More about this job in New Zealand

Stats NZ links this occupation to Tahatū, the government careers website, which has more about the work in New Zealand, including pay: Fitter , Lathe operator , Machine setter , Maintenance engineer , Maintenance technician , Rolling stock mechanic , Maintenance supervisor .

Not sure this is your occupation?

Picking the right occupation decides the skill level, and with it the visa rules above. Talk it through with us: we will listen to your situation and match you with the right IAA-licensed adviser. You can also check your pay and work experience against the residence wage rules with our calculator.

Book a free 15-minute call Check your pay and work experience

Frequently asked questions

What is the ANZSCO code for Fitter (General)?

Fitter (General) is ANZSCO 1.3 occupation 323211, in unit group 3232 Metal Fitters and Machinists. Immigration New Zealand uses ANZSCO 1.3 for most work visa applications and all Skilled Migrant Category applications.

What skill level is Fitter (General)?

ANZSCO skill level 3, where 1 is the most skilled and 5 the least. NZQF Level 4 qualification. At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Is Fitter (General) on the Green List?

Yes. Immigration New Zealand lists Fitter (General) (Tier 2) under ANZSCO 323211. Only the named role qualifies, and INZ sets qualification, registration or experience requirements for it.

Sources: ANZSCO version 1.3, Australian Bureau of Statistics, CC BY 4.0, synced 31 October 2026; National Occupation List V3.0.0, Stats NZ, CC BY 4.0, synced 1 November 2026; Immigration New Zealand occupation lists, synced 31 October 2026. This page reproduces published classifications and Immigration New Zealand's lists. It is general information, not immigration advice. ProVisas is a licensed New Zealand immigration advisory firm (IAA Licence 201301110).