ANZSCO 1.3 occupation

Construction Rigger: ANZSCO code 821711

Construction Rigger is occupation 821711 in ANZSCO 1.3, the classification Immigration New Zealand uses for most work visas and every Skilled Migrant Category application. It sits at ANZSCO skill level 3, in unit group 8217 Structural Steel Construction Workers.

ANZSCO code
821711
Skill level
3 New Zealand level (Australia: 4)
Unit group
8217 Structural Steel Construction Workers
Green List
No

Construction Rigger: qualifications and experience required in New Zealand

ANZSCO places this occupation at skill level 3. For New Zealand, ANZSCO describes the qualifications and experience as:

NZQF Level 4 qualification. At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

ANZSCO gives this occupation a different skill level in each country: 4 in Australia and 3 in New Zealand. Immigration New Zealand uses the New Zealand level, so Australian lists and sites that show level 4 do not apply to a New Zealand visa.

Under the National Occupation List, code 821711 is "Construction Rigger" at NOL skill level 3: NZQCF Level 4 qualification, or at least three years of relevant experience may substitute for the formal qualification (NZQCF Level 4/NOL Skill Level 3).

A skill level describes the occupation, not you. Immigration New Zealand matches a job to the single closest occupation, and the skill level comes from that occupation; more experience does not move an occupation to a higher level.

What does a construction rigger do?

Assembles and installs rigging gear, such as cables, ropes, pulleys and winches, to lift, lower, move and position equipment, structural steel and other heavy objects. Registration or licensing may be required.

Tasks for unit group 8217 Structural Steel Construction Workers include:

  • Erecting lifting tackles by attaching pulleys and blocks to fixed overhead structures, and installing cables and attaching counterweights
  • Attaching slinging gear to hoisting equipment and objects to be moved using clamps, hooks, bolts and knots
  • Fitting and bolting tubes, support braces and components to form bases and build up scaffolding
  • Lifting and positioning sections of scaffolding
  • Measuring, cutting, bending and fitting welded wire mesh into concrete areas to be mesh-reinforced
  • Fixing mesh and reinforcing steel into position in formwork for concrete pours
  • Setting up winches and rigging equipment to raise and position girders, plates, columns and other steel units
  • Erecting guard rails, guy wires, ropes and clears, laying planks and hanging safety nets

Other job titles under ANZSCO 821711

Alternative titles and specialisations from ANZSCO, and job titles Stats NZ lists under the same code:

  • Rigger
  • Rigger Scaffolder
  • Rope Splicer
  • Scaffolding Rigger
  • Well Drilling Rigger

What skill level 3 means for New Zealand visas

Visa rule For this occupation More
Accredited Employer Work Visa: longest visa Up to 5 years for skill level 1 to 3 roles. AEWV guide
AEWV: evidence of English Required for skill level 3 roles from 1 June 2026, with limited exemptions. AEWV guide
Supporting a partner's visa The skill level 1 to 3 wage threshold applies. Partner of a Worker
Skilled Migrant Category: Skilled Work Experience pathway Open to skill level 1 to 3 occupations, with work experience and pay requirements. Skilled Work Experience pathway
SMC red and amber lists Not on either list. INZ's lists
SMC Trades and Technician pathway Not on INZ's list of eligible occupations. INZ's list
Green List No Green List role is listed under this code. INZ's Green List

Rules as published by Immigration New Zealand. Lists synced 31 October 2026. Each visa has further requirements beyond skill level, including pay and work experience.

National Occupation List occupations for ANZSCO 821711

Stats NZ's National Occupation List is gradually replacing ANZSCO. These NOL occupations map to ANZSCO 821711. Immigration New Zealand accepts a NOL code only for an AEWV or job check, and only for occupations on its published list; for any other visa, use the ANZSCO code.

NOL code NOL occupation NOL skill level INZ accepts for an AEWV
821711 Construction Rigger 3 Not yet
821715 Rope Access Technician 3 From 3 November 2025
821716 Load Lifting Rigger (Rope Fabrication) 3 From 3 November 2025

More about this job in New Zealand

Stats NZ links this occupation to Tahatū, the government careers website, which has more about the work in New Zealand, including pay: Rigger .

Not sure this is your occupation?

Picking the right occupation decides the skill level, and with it the visa rules above. Talk it through with us: we will listen to your situation and match you with the right IAA-licensed adviser. You can also check your pay and work experience against the residence wage rules with our calculator.

Frequently asked questions

What is the ANZSCO code for Construction Rigger?

Construction Rigger is ANZSCO 1.3 occupation 821711, in unit group 8217 Structural Steel Construction Workers. Immigration New Zealand uses ANZSCO 1.3 for most work visa applications and all Skilled Migrant Category applications.

What skill level is Construction Rigger?

ANZSCO skill level 3, where 1 is the most skilled and 5 the least. NZQF Level 4 qualification. At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Is Construction Rigger on the Green List?

No Green List role is listed under ANZSCO 821711 on Immigration New Zealand's Green List as at 31 October 2026.

Sources: ANZSCO version 1.3, Australian Bureau of Statistics, CC BY 4.0, synced 31 October 2026; National Occupation List V3.0.0, Stats NZ, CC BY 4.0, synced 1 November 2026; Immigration New Zealand occupation lists, synced 31 October 2026. This page reproduces published classifications and Immigration New Zealand's lists. It is general information, not immigration advice. ProVisas is a licensed New Zealand immigration advisory firm (IAA Licence 201301110).